C5 Corvette Car Covers - Coverbond-5
- Autobody Armor C5 Corvette Car Covers
- Coverbond-4 C5 Corvette Car Covers
- Coverbond-5 C5 Corvette Car Covers
- Intro-Guard C5 Corvette Car Covers
- Silverguard Plus C5 Corvette Car Covers
- Stormproof C5 Corvette Car Covers
- Stretch Satin C5 Corvette Car Covers
- Triguard C5 Corvette Car Covers
- Corvette Car Cover Accessories
- Misc C5 Corvette Car Covers
If you are looking for all-round, heavy duty car covers that can protect your vehicle in extended rain, Coverbond-5 car cover from Coverking is for you. Coverking, the acknowledged name in custom car cover world is known for its seamless and UV resistant auto accessories. Coverbond-5 car covers are made of seamless materials that guarantee no leakage inside even in extended rain and rainstorms.
Made of five layers, the custom-fit car cover is only multi-layered non-woven car cover in the market. The non-woven material is strong and doesn’t run out easily. The top Polyester layer is excellent UV inhibitor. While the second Melt Blown layer provides excellent water resistance and breathability, the PP Spunbond layer used in the third layer makes car covers strong and durable. PP Spunbond material is effective UV resistant and further enhances UV protection for your vehicle.
Again, in a bid to make Coverbond-5 even more effective, the Polyethylene micro porous film is used in the fourth layer. The water resistant material makes custom car covers superior in rainy weather conditions. Coverbond-5 car covers have a fifth layer exclusively made of Polyester felt. The soft material caress your car finish with silky tough.
Whether you are looking for strong and durable car cover or soft and silky touch for your vehicle, Mosom Plus car cover offers unique combination of strength, breathability, UV protection, water resistance and soft touch.
- Multi-layered protection: Five different layers provide different features:
- Top Polyester Spunbond layer provides greater UV protection and strength
- Second Melt Blown layer protects against rain water, moisture and rust
- Third PP Spunbond layer enhances UV protection
- Forth Polyethylene micro porous film layer is effective water resistant
- Bottom Polyester Felt layer caress your car finish with soft touch and prevents scratches
- Seamless construction for least leakage
- Effective, strong and long lasting
- Fortifies with UV retardant agents for greater UV protection
- Excellent color fastness
- Good tensile strength
- Better heat insulation
- Extended rot and mildew protection
- Fire retardant
- Stretch and wrinkle resistant
- Easy to handle - clean and dry
- Best for rainy seasons
- Effective in most of the weather conditions
Installation of your Coverbond-5 Car Cover is a simple procedure. The installation is all about draping the Coverbond-5 Car Cover over the vehicle but before moving ahead to install the car cover, it is essential for you to ensure that your vehicle is neat and tidy. Altogether you should take care of certain other important details for successful Coverbond-5 Car Cover installation. These are, namely:
Before installing the Coverbond-5 Car Cover, first of all, you should ensure that the vehicle is clean and dust free. If the vehicle is not clean, then clean it properly before draping the Mosom Plus Car Cover around it. If you mistakenly put the car cover over a dirty vehicle, then dust particles would get stuck to your car cover and damage the fabric finish.
Secondly, never drape the Coverbond-5 Car Cover over a wet vehicle at any cost.
While installing the Coverbond-5 Car Cover, ensure that your Coverbond-5 Car Cover never comes in touch with the sharp edged/too hot exhaust tips. This precaution is necessary because as soon as your Coverbond-5 Car Cover touches the sharp edged/too hot exhaust tips, it melts onto tips.
If your vehicle is equipped with a fixed –position antenna, you need to induce an opening in the Coverbond-5 Car Cover to cover the antenna patches. Now, for proper installation of the Coverbond-5 Car Cover over the antenna, remove the antenna first and position the car cover over the vehicle. Then, figure out the base of the antenna and induce a small opening in the Mosom Plus Car Cover at the exact position where the antenna meets the base. Thereafter, install the antenna and take away the car cover and in the end, you can effortlessly drape the Coverbond-5 Car Cover over the antenna patches.
Coverbond-5 Car Cover Installation Process:
To install the Coverbond-5 Car Cover properly, first of all, place it over the vehicle body and unroll it gradually. Then cover the mirror pockets before moving on to cover the front and rear ends of the vehicle if your Coverbond-5 Car Cover is fitted with mirror pockets. Now, after successfully installing the mirror pockets, you can easily cover the front and rear bumpers of your vehicle.
Coverbond-5 Car Cover Lock Kit Installation:
Your Coverbond-5 Car Cover lock kit has a vinyl-coated cable and it is further equipped with a metal piece on one end and a loop at the other end. Now, after moving to the passenger’s side, fix the cable loop at a position of around two inches through the grommet. Next, take the metal piece end along under the grommet through the loop of the first cable and take it to the driver’s side. Thereafter, from the driver’s corner, pull the cable from outside the cover by two inches through the grommet and then lock the end piece to the cable body.
Coverbond-5 Car Covers can be cleansed properly via hand washing and this process is generally applied to the Coverbond-5 Car Covers that are not considerably dirty.
You can also use the machine cleaning procedure to cleanse your Coverbond-5 Car Cover but for machine cleaning, you need to avail of large-sized M/Cs. These are automatic speed control washers that you can use to wash your car cover properly and for machine cleaning, don’t use small automatic speed control washers as the washing space is considerably small in small M/Cs. Alongside, agitators are not recommended for use as the use of agitators can unleash heavy damage to your car cover fabric.
Mosom Plus Car Cover Cleaning Process:
For proper cleaning of your Coverbond-5 Car Cover, first of all, get hold of a non-caustic, non-toxic, bio-degradable and environment friendly anionic detergent. Take two cups of this detergent and mix with warm/cold water before soaking the Coverbond-5 Car Cover on it for five minutes. Therefore, you are required to undertake rinsing of your Coverbond-5 Car Cover for five minutes with gentle cycles and then rinse the car cover again with two cycles. Next, rinse the Coverbond-5 Car Cover for one cycle, make it half dry and thereafter place it over your vehicle hood so that the affect of air makes it completely dry.
Corvette Car Cover Coverbond 5 : 2001-2004 Z06
Regular Price: $189.95
On Sale For: $169.95
Corvette Car Cover Coverbond 5 : 1997-2004 C5
Regular Price: $189.95
On Sale For: $169.95